4g64 at Yahoo! Groups

Re: Axle on driver side won't come out! Please help!!!!

redfire98gs — Thu, 09 Jul 2009 19:34:12 GMT

... Just want to complete this post, and maybe give my thoughts on the clutch replacement from a newbie point of view TOOLS ARE MUST to HAVE! 1. If this is the

Re: upper control arm big problem

Star Gay — Tue, 07 Jul 2009 03:05:38 GMT

I say attempt to find a front clip and weld it on there ________________________________ From: erik castaneda To: 4g64@yahoogroups.com

upper control arm big problem

erik castaneda — Tue, 07 Jul 2009 01:47:49 GMT

Well the i hit a huge pot hole out here and where the front driver side upper control arm bolts to the car at cracked (on the body of the car not the arm its

(no subject)

Star Gay — Mon, 29 Jun 2009 16:52:31 GMT

Im very glad to be apart of this team [Non-text portions of this message have been removed]

Re: 4g64 swapped out

Patrick Kaufman — Sat, 27 Jun 2009 13:25:36 GMT

Try posting on craigslist, here, and thegalantcenter.net, and the dsm forums ________________________________ From: Chad To:

4g64 swapped out

Chad — Sat, 27 Jun 2009 04:53:34 GMT

i just swapped out the 4g64 motor with a 4g63 and opted NOT to go with the stroker by using the 64 block...does anyone know of a good place to try and sell the

ngk sparkplugs

Chris Leh — Fri, 26 Jun 2009 22:24:31 GMT

FYI for anyone that uses the bkr7e, they changed the stock number from 6027 to 4644 but the part number is still the same(bkr7e) it took 3 trips to advance

Re: valve cover gaskets

godfather6385 — Thu, 25 Jun 2009 06:07:39 GMT

duct tape. i need to have a clean under hood. i just used the stock part for now. it dont fit to well.

Re: valve cover gaskets

Philip Sowers — Wed, 24 Jun 2009 21:46:51 GMT

You can always ducttape over the crack until you get anew one. Pretty cheap on olde eBay! ;) ... --=[ philipsowers@... . . . ... message from my

Re: valve cover gaskets

godfather6385 — Wed, 24 Jun 2009 19:43:57 GMT

i replaced all the valve cover gaskets, and it started right up. yay. now all i need is the connector that connects my cai to my intake manifold. my dried out

Re: rear sway bar install help

Chris Leh — Thu, 18 Jun 2009 16:20:50 GMT

awesome thanks curt ... [Non-text portions of this message have been removed]

Re: rear sway bar install help

Curt Shambeau — Thu, 18 Jun 2009 16:09:06 GMT

FWD. -> -----Original Message----- -> From: 4g64@yahoogroups.com [mailto:4g64@yahoogroups.com] On Behalf Of -> Chris Leh -> Sent: Thursday, June 18, 2009 10:55

Re: rear sway bar install help

Chris Leh — Thu, 18 Jun 2009 15:56:20 GMT

Thanks guys. Do I want the control arms from a fwd or awd. Should I get the fwd or awd sway bar. ... [Non-text portions of this message have been removed]

Re: rear sway bar install help

Curt Shambeau — Thu, 18 Jun 2009 15:33:14 GMT

Oh, one more thing... Directions for install: http://web.archive.org/web/20060111215039/www.rernetworking.com/rmdsm/DIRECT IONS+2G+Bars.pdf Curt ->

Re: rear sway bar install help

Curt Shambeau — Thu, 18 Jun 2009 15:32:13 GMT

4 bolts MF241251 $ 1.09 each 4 nuts MS440504 $ 1.01 each 2 brackets MB515245 $ 6.00 each 2 end links MB892982 $ 53.00 each 2 lower control arms MB864728 $