CateraOwners at Yahoo! Groups

Re: Replacing a Catera Differential a DIY Job?

Dan Allen — Sun, 05 Jul 2009 17:10:09 GMT

... Yes. It obviates the issues I mentioned. I don't know what "special tools" Scott needed/used but I can't imagine there's anything terribly complicated in a

Re: Replacing a Catera Differential a DIY Job?

jdoner@... — Sun, 05 Jul 2009 15:35:08 GMT

Thanks for the response. I would probably replace the entire unit, housing and all. Does that change your advice any? Thanks. Jeff ... From: Scott Pearson

Re: Replacing a Catera Differential a DIY Job?

Scott Pearson — Sun, 05 Jul 2009 14:54:14 GMT

... From: "Dan Allen" ... I'd bet he's talking about the whole differentail assembly, housing and all. I did one a couple months ago, it's

Re: Replacing a Catera Differential a DIY Job?

Dan Allen — Sun, 05 Jul 2009 12:16:35 GMT

... I have no knowledge of the specifics of the Catera but I can certainly check the manual if you need them. My gut reaction is it's probably not a job for

Replacing a Catera Differential a DIY Job?

jdoner — Sun, 05 Jul 2009 02:48:15 GMT

Need to put a new differential in my a '99 Catera. Unless I can do it myself, the car will be sold or scrapped. Never done it but parts are pretty readily

Re: Control arm -shipping weight?

gord_gecko — Sat, 04 Jul 2009 18:53:14 GMT

... Brilliant Terry. Now before we set this in motion, can anyone on this or the Omega owners list confirm that the control arms/wishbones for an Omega B 3.0

Re: Control arm -shipping weight?

kurt carlson — Sat, 04 Jul 2009 15:49:13 GMT

Ive been working on this for a while now. UPS from London to my house in jersey is approx. U.S. $163.00 for a 2' x2' x2' box that weighs 35 lbs. UPS LONDON

Re: Control arm -shipping weight?

Terry Paget — Sat, 04 Jul 2009 15:32:13 GMT

Hi Dave, that's fine by me. I am Terry Paget of 36 Clapton Road, Midsomer Norton, Radstock BA3 2LP. When goods arrive I will pack for air freight and forward

Driver side window switch

gjenn12 — Sat, 04 Jul 2009 03:05:01 GMT

Well after many miles of use the driver side window switch got so gooey and dirty I had to do some thing I tried several solutions and came up with plain old

Re: For sale 1998 Catera

Frank Triana — Sat, 04 Jul 2009 01:45:12 GMT

I'm looking into the cash for clunkers ($3500) and am willing to have someone here a shot at my 2001 Catera before the bone yard/crusher, it too has the

For sale 1998 Catera

mthaxto@... — Sat, 04 Jul 2009 01:31:56 GMT

I have a 1998 Catera for sale. It has 102K miles,Red ext,Beige int,Spoiler,Bose sound system,heated seats, etc. This car has the infamous oil cooler leak but I

Re: Powertrain Control Module (PCM)

dalermcbride — Fri, 03 Jul 2009 22:20:06 GMT

... Since it appears a salvaged ECM cannot be programmed if installed in my catera absemt GM's ultra expensive tech equipment, could I get around this problem

GTO Calipers for the Catera

akamai43 — Fri, 03 Jul 2009 17:25:05 GMT

I know someone in the GTO forum who is looking to sell his 2004 GTO Calipers for $150.00 for front and rear. They are a direct fit for the Catera just larger

Re: Control arm -shipping weight?

gord_gecko — Fri, 03 Jul 2009 17:23:51 GMT

... Did they ship them to the U.S. Richard?

Re: Control arm -shipping weight?

allsop_richard — Fri, 03 Jul 2009 15:51:11 GMT

I can see Terry is helping with 'wishbones'. I fitted a pair of none GM wishbones in 2007, 41,000 miles ago, they cost £50.00 the pair, still no problems.