MSG-1 at Yahoo! Groups

Re: degrading HDDs

Ulrich G. Kliegis — Sun, 08 Nov 2009 17:22:58 GMT

On 8 Nov 2009 at 16:51, David J Taylor wrote: An: Von: "David J Taylor" Datum: Sun, 8

Re: degrading HDDs

David J Taylor — Sun, 08 Nov 2009 16:51:33 GMT

From: "Ulrich G. Kliegis" <> ... I'm delighted that you have had success with defragging - I had tried O&O in the past but it had problems with one of my disks

Re: degrading HDDs

Ulrich G. Kliegis — Sun, 08 Nov 2009 16:32:38 GMT

David, this was a typical november sunday ideally suited for giving some TLC to the receiver PC ... :) It's great to have it up and running again now. I've run

TSL Announcement Channel

tittyb80 — Tue, 03 Nov 2009 19:32:44 GMT

Hello everybody, I have a problem with my EUMETCast station. Past time I have a lot of messages as Channel "TSL Announcement Channel": Lost message 5636988

Re: how to point dish

terrymullen — Mon, 02 Nov 2009 17:01:54 GMT

Hi Kamil Just a couple more points on dish alignment: I use the dishpointer tool from here - http://www.smw.se/SMWLink.htm . You just need to put in your

Re: how to point dish

geojohnt@... — Sun, 01 Nov 2009 12:17:14 GMT

... elevation ... Hello Kamil, I have been trying to keep out of this discussion as several members have offered (good) advice - and you can have too much to

Contact Bruce Martin

Alan Banks — Sat, 31 Oct 2009 09:17:00 GMT

Sorry to bother the list, but I'm trying urgently to contact Bruce Martin, who subscibes to one or both of these lists. I'm getting no response to his

Re: how to point dish

a_van_belle — Fri, 30 Oct 2009 23:31:49 GMT

Hello Kamil, In your screendump I see no transponder frequency entered ( 11977 MHz) Symbolrate is also empty ( 27500 Symb/s). Without these parameters set your

Re: how to point dish

David — Fri, 30 Oct 2009 23:21:43 GMT

Kamil This web site may help you point your dish in the right direction http://www.dishpointer.com/ David Simmons _____ From: MSG-1@yahoogroups.com

Re: MSG reception tutorial for GNU/Linux

David J Taylor — Fri, 30 Oct 2009 18:23:18 GMT

... Excellent. ... As the virtual box works, I would use that method. ... The multiple varieties of Linux make it very difficult for developers and suppliers

Re: MSG reception tutorial for GNU/Linux

nigel — Fri, 30 Oct 2009 17:40:05 GMT

Hi David, sorry about the delay in replying - been busy elsewhere! No problem with your software - I have run them all on an XP virtual box on my Archlinux

Re: how to point dish

David J Taylor — Fri, 30 Oct 2009 15:57:28 GMT

... [] ... [] ... Kamil, What LNB are you using? Comparing your settings with mine: http://www.satsignal.eu/wxsat/atovs/screenshot_setup.png - I have the LNB

Re: how to point dish

Kamil — Fri, 30 Oct 2009 14:52:40 GMT

Hello All, Today I was trying again to point the dish to Eurobird. No success. The best I could get was signal strength around 68 pct, even 75 i got for while,

Re: how to point dish

a_van_belle — Wed, 28 Oct 2009 20:36:39 GMT

Hello Kamil, Welcome to the list ! Pointing a dish at EB9A without tools is not easy. First set the correct transponder on your receiver, this should activate

Re: how to point dish

Kamil — Wed, 28 Oct 2009 15:08:14 GMT

... Yes, my dish is Ku-band. Indeed, I did not care about it until now. Just now I imagine how silly it was to point dish to Atlantic Bird which is C-band.