MessaboutW at Yahoo! Groups

Holsclaw Trailer

balloujames — Mon, 23 Nov 2009 19:43:25 GMT

Holsclaw trailer for sale, Portland area, standard 20% Coots discount. Jim http://portland.craigslist.org/clc/boa/1478872599.html

Re: New Coast Guard rules for bar crossings(attn John K & John W)

Myles J. Swift — Mon, 23 Nov 2009 17:57:46 GMT

Bryan, I knew there had to be another reason for Micro to have such high sides. So now lots of windage is evidence of safety? If you build a 30 footer with 6

Happy Thanksgiving

David — Mon, 23 Nov 2009 07:54:14 GMT

This special day is coming fast. Let me be the first to wish all the Coots a wonderful day of Thanks... for this year, and far into the future:

Re: New Coast Guard rules for bar crossings(attn John K & John W)

gregstoll80 — Mon, 23 Nov 2009 00:29:18 GMT

That seems accurate, but I'm not entirely certain how this will be enforceable. Restrictions are currently based on length; freeboard varies from boat to

Re: NOAA charts for free

Frank Mabrey — Sun, 22 Nov 2009 23:41:45 GMT

Another inexpensive option is ShipPlotter at http://www.coaa.co.uk/shipplotter.htm This will work with NOAA raster charts. I also lets you hook up an AIS

Re: New Coast Guard rules for bar crossings(attn John K & John W)

bryanbeachy — Sun, 22 Nov 2009 21:40:47 GMT

I think there might(like in the 70's) be a serious problem here. I went to the Federal Register online;

Re: stove

Roger L. — Sun, 22 Nov 2009 19:03:56 GMT

Great! How's it work? And what kind of condition was it in really? Roger ... From: "Steve" To: Sent: Sunday,

Re: stove

Steve — Sun, 22 Nov 2009 18:42:28 GMT

I came up with an excuse and bought this heater. First it will heat my small work shed. until I finish building our earth sheltered home, then build a "real"

Re: Need An Outboard Motor

Steve — Sun, 22 Nov 2009 18:36:52 GMT

This is not what you are looking for, but I still have my Yamaha 20 hp for sale. There is a picture of it in the photo section with my old Dillabaugh Rocket.

Need An Outboard Motor

Cal Drake — Sat, 21 Nov 2009 21:12:49 GMT

I'm not sure I want to wait till my outboard guy gets "a round twoit" on my motor trade, it has been a couple months now !! It may be that I will be

Rebuildable outboard ??

Cal Drake — Sat, 21 Nov 2009 17:38:33 GMT

I'm trying to learn how to work on outboards, just for my own amusement. Does anybody have a smaller size ( so I can carry or load it) one or two cyl. motor

Re: Yaquina Bay Crabbing 20Nov09

gregstoll80 — Sat, 21 Nov 2009 15:32:01 GMT

We had a good time; caught 7 Dungeness and 8 Red Rock. Got some work done on the boat trailer as well :-) Greg

Yaquina Bay Crabbing 20Nov09

LesterB — Sat, 21 Nov 2009 13:17:01 GMT

A special thank you to Greg for dragging this old guy to the coast and allowing me to work on the good boat Titan and a round of grabbing at Yaquina Bay.

Re: Cherry boards needed

dave — Sat, 21 Nov 2009 06:51:04 GMT

Scottie's is NOT gone, Terry. Same location, now called Urban Lumber Co., owned by my friend Seth San Filippo. He's got more and better woods than Scottie,

Re: stove

David — Sat, 21 Nov 2009 06:06:08 GMT

And for $150??? I'd snag it in a heartbeat if it was on my list. Cheers, David G