Mirage-Net at Yahoo! Groups

Re: sound cuts in and out and signal is weak using volume slider mak

david.sovar — Mon, 09 Nov 2009 23:07:57 GMT

Hey Christian, Thank you very much and I am going to take your advice simply becuase I don't want to take any chances with my mirage. I wanted to clarify that

Re: sound cuts in and out and signal is weak using volume slider mak

david.sovar — Mon, 09 Nov 2009 23:02:49 GMT

I have the rackmount model DMS-1

Re: sound cuts in and out and signal is weak using volume slider mak

Christian Forget — Mon, 09 Nov 2009 16:14:57 GMT

Most of the time, a noisy volume control is fixed just by moving it back and forth a few tens of times. The noise mostly come from an oxidized wiper that

Re: sound cuts in and out and signal is weak using volume slider mak

jammie — Mon, 09 Nov 2009 13:52:55 GMT

first what moel is it if its the metal mono version the the slider controls the volume of the doc chip if its the plastic version then the slider controls the

Re: sound cuts in and out and signal is weak using volume slider mak

david.sovar — Mon, 09 Nov 2009 08:07:34 GMT

Thanks. What is the procedure to hardwire volume to 75%? David

Re: sound cuts in and out and signal is weak using volume slider mak

Gordon JC Pearce — Mon, 09 Nov 2009 07:32:38 GMT

... Any good-quality switch cleaner should do it. Be careful not to get it on the front panel, as it can attack certain plastics - use the little tube thing.

sound cuts in and out and signal is weak using volume slider makes i

david.sovar — Mon, 09 Nov 2009 04:03:00 GMT

Randomly mirage sound disappears producing a faint weak signal that is barely heard and I would move the volume slider up and sound to get it to come back but

Re: malfunctioning issues

Salvador Ortiz — Sat, 07 Nov 2009 15:11:01 GMT

That I didn;t know. ... From: Christian Forget Subject: Re: [Mirage-Net] malfunctioning issues To: Mirage-Net@yahoogroups.com Date: Friday,

Re: malfunctioning issues

Christian Forget — Sat, 07 Nov 2009 05:00:20 GMT

That's safe! But it does not remove magnetic particles that have maybe tricked to the heads and there is almost certainly some... Air is good to clean dry

Re: malfunctioning issues

Salvador Ortiz — Sat, 07 Nov 2009 00:04:52 GMT

That's what I meant, compressed canned air from a computer or electronic store. ... From: Christian Forget Subject: Re: [Mirage-Net]

Re: malfunctioning issues

shiva330 — Fri, 06 Nov 2009 16:29:20 GMT

My drive was malfunctioning a few years ago and all it took was some TLC. All I did was to remove the drive from unit and with something like a long Q-tip, I

Re: malfunctioning issues

Christian Forget — Fri, 06 Nov 2009 14:06:34 GMT

Compressed air?... Avoid air hoses used in service stations, machine shop or any kind of factory that use compressed air to activate powered tools. Those

Re: malfunctioning issues

Salvador Ortiz — Thu, 05 Nov 2009 02:39:53 GMT

Remove the drive and clean it with compressed air. ... From: Gordon JC Pearce Subject: Re: [Mirage-Net] malfunctioning issues To:

Re: malfunctioning issues

deltagroovefactor — Thu, 05 Nov 2009 01:21:53 GMT

Hi Scott, Not sure how technical you are; you may have already thought about these things. Here are some general areas to consider: If you have 2 units, you

Re: malfunctioning issues

Gordon JC Pearce — Wed, 04 Nov 2009 23:23:35 GMT

... For the one with poor audio, check the output of each filter IC. If it's not there, check the filter input. If you still don't have it, check the 4051