Nauteek at Yahoo! Groups

Recovering from a dead battery

tornadokc247 — Fri, 21 Aug 2009 20:57:38 GMT

Well, I accidentally left my SC200 on the boat and must have not shut it off. It was there for 2 or 3 weeks. When I went to switch it on, nothing worked. Tried

Self Tacking Mount for Rotating Rigs

tornadokc247 — Fri, 08 May 2009 08:38:01 GMT

Got tired of trying to remember to take a picture of my Nauteek mount on my Tornado, so made a diagram instead: The

New V2.3 NAUTEEK firmware upgrade available for SC devices

NAUTEEK — Wed, 08 Oct 2008 14:52:09 GMT

Dear all, Our new V2.3 NAUTEEK firmware upgrade is right now available for SC Tactical Speedo Compass. If you are already a SC200 user, just download and

Re: SC200 on Musto Skiff?

tornadokc247 — Mon, 29 Sep 2008 21:29:12 GMT

No problem reading it from the mast on my Tornado cat (10 ft beam) while trapezing off the rear corner. Mike. ... from ... post ... from ... should be ...

New Firmware

opensailingusa — Fri, 26 Sep 2008 17:09:30 GMT

In October NAUTEEK are planning to release a new firmware version including the following new features... * New display of speed information. Tenth of knots

Re: SC200 on Musto Skiff?

grahamrcooper — Wed, 17 Sep 2008 21:15:43 GMT

Thanks Norbert and Pascal for your responses. I ordered an SC200 from ExAqua today and will make a mounting soon. If successful I will post a picture. Cheers,

Re: SC200 on Musto Skiff?

Pascal — Tue, 16 Sep 2008 16:07:44 GMT

From my experience you can easily read the 25mm digits (2/3rd) from 2.5-3m, and the 40mm digits (full display) from 4-5m, so you should be fine. On my Astus

Re: SC200 on Musto Skiff?

Norbert Kiesel — Mon, 15 Sep 2008 23:49:57 GMT

... I'm actually using it on keelboats so take my answer with a grain of salt, but i think visibility is one of the strong points of SC200, especially if you

SC200 on Musto Skiff?

grahamrcooper — Mon, 15 Sep 2008 23:21:15 GMT

I am considering buying an SC200 for my Musto Skiff but am uncertain about visibility of the display when trapezing. I think I could either mount the unit in

Re: Boom Mount for Nauteek

tornadokc247 — Thu, 10 Jul 2008 18:38:51 GMT

No pics yet...but I can report the setup appears to work fairly well. The display is "tacked" so it faces to the weather side, points aft of the shroud, about

Re: Boom Mount for Nauteek

Norbert Kiesel — Thu, 10 Jul 2008 08:48:06 GMT

... Pictures?

Re: Things I'd like to see...

Norbert Kiesel — Thu, 10 Jul 2008 08:22:56 GMT

... Other item: showing the current time/date. Comes handy to check how long until the 5 minute warning.

bought dual-lock from Radio Shack

Norbert Kiesel — Tue, 24 Jun 2008 05:22:12 GMT

For those in the US: I bought dual-lock strips from Radio Shack last week and used them last weekend. They seem to be ok: the strips come in packs of 4 for

Boom Mount for Nauteek

tornadokc247 — Fri, 13 Jun 2008 23:33:47 GMT

I'm about to test out a homemade boom mounting bracket for my Nauteek. This is for use on my Tonrado catamaran. I need to be able to see the display from

Re: good source for 3M dual lock?

tornadokc247 — Fri, 13 Jun 2008 22:59:44 GMT

I bought some from APS a while back. It turned out to be the exact same stuff on the Nauteek. Do try to make sure you get the black type, not the clear