NexusMustang at Yahoo! Groups

Re: Parts Availability

nexusmustang@... — Tue, 27 Oct 2009 10:33:42 GMT

Hello Mark The cowls are the same.The front of the fed pich cowl is shortened for the constant speed prop. And I made a new mould for the sspinner which is

Re: Parts Availability

MARK MCLAUGHLIN — Sun, 25 Oct 2009 15:17:36 GMT

Dick; I have not determined which prop to complete mine with. I was just wondering how much difference there is in the cowls (constant speed vs fixed

Re: Parts Availability

nexusmustang@... — Sat, 24 Oct 2009 09:53:53 GMT

I still will supply composite parts. I have been supplying tail surface tips to different builders. I have not had any firm orders for other parts. ( Cowling,

Parts Availability

rv4bedford — Sat, 24 Oct 2009 00:16:08 GMT

Does anyone know if Dick Eaves is still selling parts such as the cowl and wing tips? I just got done building the engine mount....then I read in an old forum

Re: This Forum

Peter Carr — Wed, 14 Oct 2009 00:11:14 GMT

Dear Eduardo, Our progress with the Nexus kits has been slower than we expected. We have now completed forming all the fuselage frames, both front and rear

Re: This Forum

Peter Carr — Tue, 13 Oct 2009 23:41:28 GMT

When we at Carr Engineered Equipment went to skin the tailcone on our prototype and proof of drawings rear fuselage, we found that some frames did not fit. So

Re: This Forum

Eduardo Laranjeira — Tue, 06 Oct 2009 15:27:07 GMT

Carr Are you selling the Kit , now?I am interested, as I fone you, several months ago.. Eduardo lamy ________________________________ From: Peter Carr

Re: This Forum

Gary — Tue, 06 Oct 2009 06:18:05 GMT

Hi If there had been a kit of parts when I started out I would have used it! If you figure that a Vans kit will take a novice 1st time builder like me maybe

Re: This Forum

Peter Carr — Tue, 06 Oct 2009 05:43:00 GMT

Carr Engineered Equipment is busy building two sets of parts for the Nexus Mustang at present: one for the Carr prototype and one for an Australian customer

Re: Builder Status

Peter Carr — Tue, 06 Oct 2009 05:36:49 GMT

Carr Engineered Equipment is proceeding with building fuselage and wing rib components for the Nexus. The next5 batch oif components is nearly readfy for

Re: (unknown)

Peter Carr — Tue, 06 Oct 2009 05:16:14 GMT

To check the quality of CARR wing ribs, ask Dick Eaves for his views on the ribs I made for him earlier this year. Peter Carr

Re: (unknown)

MARK MCLAUGHLIN — Mon, 05 Oct 2009 20:19:45 GMT

I want to build for the experience and fulfillment of building first of all. Then to have a really hot aircraft I can maintain is my goal. I don't have

(no subject)

hatztwo2tango — Mon, 05 Oct 2009 15:37:21 GMT

Would I do it again? That depends on why you are considering building an airplane. If your principal goal is to have an airplane for motoring to fly-ins and

Re: Builder Status

MARK MCLAUGHLIN — Mon, 05 Oct 2009 02:18:13 GMT

would you do it again knowing how much extra it is? Did you consider any of the two groups offering parts such as Danny Langhorn in Houston or Carr in

Re: This Forum

MARK MCLAUGHLIN — Sun, 04 Oct 2009 20:04:04 GMT

I'm still alive and still preping garage (mostly the house) to begin the build. Mark ... From: gmort36 Subject: [NexusMustang]