ToyOutboardMotors at Yahoo! Groups

Re: Help!!!

Randy — Wed, 10 Feb 2010 03:58:01 GMT

Oops, here's the crate pic. _____

Re: Help!!!

Randy — Wed, 10 Feb 2010 03:54:34 GMT

Thank-you to everyone for all your help with the broken transom bracket. If someone comes across one for my motor please let me know and I will purchase it. I

Re: port hole

william payne — Wed, 10 Feb 2010 00:17:46 GMT

the glass is 12" acros bp ... From: Douglas Kelm To: ToyOutboardMotors@yahoogroups.com Sent: Tuesday, February 09, 2010 7:00 PM Subject: Re:

Re: port hole

Douglas Kelm — Wed, 10 Feb 2010 00:00:36 GMT

Bill, yes the pictures were great. What is the diameter of the glass area? Doug ... From: william payne To: ToyOutboardMotors@yahoogroups.com Sent: Tuesday,

Re: port hole

william payne — Tue, 09 Feb 2010 23:18:47 GMT

doug can you see how it works ? do these pics help? bp ... From: Douglas Kelm To: ToyOutboardMotors@yahoogroups.com Sent: Tuesday, February 09, 2010 5:42 PM

Re: port hole

william payne — Tue, 09 Feb 2010 23:12:34 GMT

doug here are pictures from the rear and with a latch open and laid out of the way . over the years i have spent lots of time with a die grinder since

Re: port hole

william payne — Tue, 09 Feb 2010 22:59:41 GMT

doug the flange must have mounted right to the hull of the ship. . when the ring bolts are un screwed they swing out of the way. and then you have an open

Re: port hole

Douglas Kelm — Tue, 09 Feb 2010 22:42:31 GMT

How about some bigger pictures, Bill. Those little thumbnails are hard to see. Is it a three way cover (i.e does it have a solid hatch as well as the glass

Re: Help!!! [2 Attachments

kwbearce@... — Tue, 09 Feb 2010 21:56:19 GMT

Randy, I see these motors at local AOMCI swap meets quite often. There is a swap meet this Saturday. Maybe I can pick one up cheap. Do you want a parts

Re: port hole

william payne — Tue, 09 Feb 2010 21:23:55 GMT

denny i have saved for over 26 years,. i was going to put a picture of a clipper ship inside and back light it and put it on brass legs . i bengonna . i

Re: port hole

william payne — Tue, 09 Feb 2010 21:20:21 GMT

im sorry denny i thought i had put it in there . are you sitting down? 300 dollars. bill p ... From: Denny Cole To: ToyOutboardMotors@yahoogroups.com Sent:

Re: port hole [3 Attachments]

Denny Cole — Tue, 09 Feb 2010 21:13:13 GMT

How much is it ? Thanks, Denny From: "william payne" To: Date: 02/09/2010 03:29 PM Subject:

port hole

william payne — Tue, 09 Feb 2010 20:28:08 GMT

hey guys i just put my brass port hole cover on craigs list if any one is interested. it ways a ton its 17 inches acrost it has a verry thick glass . it chines

Re: Help!!! [2 Attachments

Denny Cole — Tue, 09 Feb 2010 19:01:35 GMT

I would just set up a bunch of automated searches on eBay and wait for a complete one. There are more than one per year .. just set up the searches so you get

Re: Help!!! [2 Attachments

Bob — Tue, 09 Feb 2010 17:20:47 GMT

Hi Randy, Sorry to hear about your broken transom bracket. I think you should first look into what Bill mentioned and that's to try heli arching the bracket.