UniDiag at Yahoo! Groups

Re: DTCs on Fiat Punto 188 and general DTC Reference

danilo_papa — Sun, 22 Nov 2009 11:55:53 GMT

Great! Now I understand! Thanks

Re: DTCs on Fiat Punto 188 and general DTC Reference

WhizzMan — Sun, 22 Nov 2009 08:36:46 GMT

Ah, so there is an extra base value that you have to subtract to get the various group DTCs. Subtract 0x4000 for frame, 0x8000 for body and 0xC000 for

Re: DTCs on Fiat Punto 188 and general DTC Reference

beppe_m69 — Sat, 21 Nov 2009 17:56:53 GMT

... My example converter DTC for UniDiag: 0x0101 = P0101 (I check engine/traction) 0x1200 = P1200 0x2020 = P2020 0x3434 = P3434 0x4108 = C0108 (Frame) 0x5999 =

Re: DTCs on Fiat Punto 188 and general DTC Reference

danilo_papa — Sat, 21 Nov 2009 15:59:13 GMT

Thanks!!! And how can I convert the DTCs? E.g. from 0xD702 to U1702? D stands for U1?! And no character only numbers mean P errors?

Re: DTCs on Fiat Punto 188 and general DTC Reference

beppe_m69 — Fri, 20 Nov 2009 20:59:14 GMT

... DTC: 0xD702 = U1702 Communication CAN pilot electric steering(EPS) 0x1135 = P1135 Oxygen sensor Bank1-Sensor2 excuse for my English, not he speak! Kind

KWP2000 on motorcycle ECU

menke_2005 — Fri, 20 Nov 2009 18:14:52 GMT

I'm trying to connect to my Motorcycle ECU, and have had limited success. It responds to a KWP2000 fast init, but then I cannot get any other response - Tester

DTCs on Fiat Punto 188 and general DTC Reference

danilo_papa — Fri, 20 Nov 2009 15:25:35 GMT

Hey folks, I got two errors on my sisters Punto. It's an 188 '01 1.2 16V. The DTCs are 0xD702 and 0x1135. Has anyone a desription for them? And one question in

punto 1.2 16V

ccost1974 — Fri, 20 Nov 2009 10:30:26 GMT

Hello everybody i have a problem with Dtc in my punto i try to use a KKL USB adapter and unidiag i set to port 4 9600 with "fast init" setting enable i cannot

Re: ABS error 0x5276

Juri — Wed, 18 Nov 2009 12:47:56 GMT

Ok,thanks. I tray the traditional diagnosting - searching the earth and so on and so on... Anyway, the car is stil moving without ABS and cruise control)))

Re: help with kwmp71 alfa 156 1.8 TS (1998)

kiepas96 — Tue, 17 Nov 2009 21:08:20 GMT

Problem is solved by changing ecu. Thx 4 help!!

Re: ABS error 0x5276

WhizzMan — Tue, 17 Nov 2009 17:39:00 GMT

The communications error while doing diag is normal. The Dash uses the same "channel" as the diag. No info on the 0x5276 tho, sorry.

ABS error 0x5276

Juri — Tue, 17 Nov 2009 15:49:18 GMT

Hi, I have Alfa 156 2.4 JTD 04/2002, 150 hP, Bosch ABS 5.7 with VDC. Recently in my Alfa gone ABS, VDC and Cruise Control, but without warning messages on

Re: Error in Alfa 156 1.6 ts

WhizzMan — Sun, 15 Nov 2009 18:57:19 GMT

It means it is trying to correct your mixture, but even at maximal correction, it doesn't work. The most common cause for this is a worn MAF sensor. They can

Error in Alfa 156 1.6 ts

antoniosk — Sun, 15 Nov 2009 13:28:19 GMT

I checkjed my alfa and I have the following error. P1172 Failed Component Code: Self adaptation parameters TRA Fault Symptom: Below Minimum Limit Warning Lamp

Re : [UniDiag] Unidiag KWP71 / KWP81

messaoudene karim — Sat, 14 Nov 2009 14:03:36 GMT

stop ... De: teki99t205 Objet: [UniDiag] Unidiag KWP71 / KWP81 À: UniDiag@yahoogroups.com Date: Samedi 14 Novembre 2009, 14h46 pls