ViragoOwnersclub at Yahoo! Groups

Re: 83 750 Virago...Need Carb Help?

Robert — Fri, 20 Nov 2009 18:22:28 GMT

from: Bob Romeyn Thanks for the responses...Everyone has the same thoughts...I will not have time until next weekend to check, but will post when things are

(no subject)

Robert94903 — Fri, 20 Nov 2009 18:16:52 GMT

Thanks for the responses...Everyone has the same thoughts...I will not have time until next weekend to check, but will post when things are sorted out....You

Re: 83 750 Virago...Need Carb Help?

monte dawson — Fri, 20 Nov 2009 04:44:39 GMT

well i know your pain i have been going through the same... i found that it was the fuel air mix screw once adjusted it got rid of the problem... also check

Re: 83 750 Virago...Need Carb Help?

bugbor — Thu, 19 Nov 2009 20:38:40 GMT

Robert- first check is for vacuum leak. Spray carb cleaner or starter fluid around all parts of intake system from carbs to head. Increased idle indicates air

83 750 Virago...Need Carb Help?

Robert — Thu, 19 Nov 2009 19:25:45 GMT

from: Bob in San Rafael, California I have an 83 750 Virago, I bought it as a mini project. It ran rough when I got it... Things I've done:: Starter recall

Re: fuel air mix screw

MArkymark — Sun, 15 Nov 2009 06:12:14 GMT

I don't know how many turns it takes for your bike,but for my 83 Xv 750 ,it went like this.... First thing I did ,because the screws are hard to get to,is I

Re: fuel air mix screw

Richard Bostock — Sat, 14 Nov 2009 22:38:15 GMT

the correct way to adjust the pilot screws on the '82 xv750 is to set both pilot screws to 2 1/2 turns out from a soft seat [screw gently bottomed but not

Re: fuel air mix screw

Jennifer Baggarly — Sat, 14 Nov 2009 04:23:44 GMT

There is no actual factory set amount of turns out. They usually ran them fairly lean at 1 and half turns out, but would vary sometimes between 3/4 and 2 turns

fuel air mix screw

bigmnty — Sat, 14 Nov 2009 03:26:56 GMT

hello all i would like to ask if anyone knows the factory amount of turns the fuel air mix screw is supposed to turn out. i can't seem to get it right and

Sissybar

William Hall — Sat, 14 Nov 2009 02:26:08 GMT

When I had my 1100 the sissybar leaned back at an angle. That was one of my wifes biggest complaints about the bike. She has had back surgery and has a pin in

Re: Looking for a Virago

John Bugner — Fri, 13 Nov 2009 18:39:23 GMT

Hey Bill, I've got a 91 1100 with all the bells 23k miles, Santa Cruz shield and soft bags, it is pretty clean but could probably use a carb tune. Getting a

Man riding Harley

Cliff — Thu, 12 Nov 2009 23:01:58 GMT

A man was riding his Harley along a California beach when suddenly the sky clouded above his head... In a booming voice, the Lord said, "Because you have tried

Re: Exhaust options for Xv 750

Daniel Wickham — Thu, 12 Nov 2009 16:15:36 GMT

Glad it was of use, Dan [Non-text portions of this message have been removed]

Re: Exhaust options for Xv 750

MArkymark — Thu, 12 Nov 2009 14:04:22 GMT

Thank you sir,that is exactly what I am looking for...Mark in KC ... From: Daniel Wickham Subject: [Virago Owners Club Group]

Re: Veterans Day

dwic526466 — Wed, 11 Nov 2009 19:13:55 GMT

Amen. We all need to stop and think what conditions our men and woman are facing, and historically have faced. We owe all of them a big debt. Thank you, and