YamahaIT at Yahoo! Groups

Fw:

Rick Mercer — Tue, 26 Jan 2010 11:56:01 GMT

People, I have a 1980 IT175 up for sale I ealier stated it was an 83 (wrong) this bike has a new 3rd over yamaha piston kit, couple of

Re: Parts for IT465 1981

joyce rempel — Wed, 13 Jan 2010 20:24:26 GMT

I am selling parts slowly on Ebay if anyone is in need of parts. http://myworld.ebay.com/ebaymotors/househippo43 THANKS!!! ... From: Joel McGregor

Re: 1977 IT250 clutch seal replacement

Randy Harrell — Tue, 12 Jan 2010 12:32:40 GMT

i have several of the clutch baskets off a 77-78 it 250- if you need one e mail back !! i will dig them up ! and check there condition !! i have spare

Re: 1977 IT250 clutch seal replacement

DAVID DUNLAP — Tue, 12 Jan 2010 04:39:11 GMT

Looks like a new basket is in the works. Can you tell if a DT250 and the IT250 clutches are compatible ? I have a 77 IT 250 and was thinking a 78 DT250

Re: 1977 IT250 clutch seal replacement

Robert Fish — Tue, 12 Jan 2010 02:31:37 GMT

The baskets are valuable and the fingers around the perimeter are fragile. ... From: DAVID DUNLAP To: YamahaIT@yahoogroups.com Sent: Monday, January 11, 2010

Re: 1977 IT250 clutch seal replacement

DAVID DUNLAP — Tue, 12 Jan 2010 02:11:28 GMT

My neighbor loaned me the holding tool, he use for his RD Yamaha, perfect fit and the basket is off. But I am missing one of the two prongs, (looks like a

Re: 1977 IT250 clutch seal replacement

Robert Fish — Tue, 12 Jan 2010 01:54:31 GMT

You are correct the crank gear will barely hit the basket. I made a tool to hold the basket, by using an old metal clutch plate AND a friction disc with the

Re: 1977 IT250 clutch seal replacement

DAVID DUNLAP — Tue, 12 Jan 2010 01:25:23 GMT

Hi Randy, Is it a 26mm socket for the primary nut ? AND...noticed on the clutch basket, has 12 "U" shaped fingers with two fork tabs on each, (that hold the

Re: 1977 IT250 clutch seal replacement

tim pearce — Tue, 12 Jan 2010 01:16:25 GMT

Rope in the cylinder? I used to put them in fifth gear and hold the back brake. ... From: Randy Harrell Subject: Re: [YamahaIT] Re: 1977

Re: 1977 IT250 clutch seal replacement

Randy Harrell — Tue, 12 Jan 2010 00:22:59 GMT

yes you can ! remove the springs @ and pressure plate straighten out the lock tab washer !!!! on main shaft leave the disc in this will help hold then use

Re: 1983 IT175

mrpackrat2004 — Tue, 12 Jan 2010 00:20:38 GMT

I can use a crankshaft too..

Re: 1983 IT175

Joel McGregor — Tue, 12 Jan 2010 00:08:51 GMT

A little far away for me. I could really use an intake boot. Thanks, Joel From: YamahaIT@yahoogroups.com [mailto:YamahaIT@yahoogroups.com] On Behalf Of Rick

Re: 1977 IT250 clutch seal replacement

DAVID DUNLAP — Mon, 11 Jan 2010 22:28:30 GMT

One last question....does the clutch have to be removed BEFORE the primary gear can removed ? I have the clutch side case off and looks like there might be

Re: 1983 IT175

Rick Mercer — Mon, 11 Jan 2010 18:07:29 GMT

Peoria Illinois ... From: Joel McGregor Subject: RE: [YamahaIT] 1983 IT175 To: "YamahaIT@yahoogroups.com"

Re: 1983 IT175

Joel McGregor — Mon, 11 Jan 2010 17:49:45 GMT

Where is it? Joel McGregor ________________________________ From: Rick Mercer Sent: Monday, January 11, 2010 11:28 AM To: