akxsironduketech4garage at Yahoo! Groups

Re: New Member - Intro and thinking about turbo 2.5...

Paul Fox — Wed, 23 Sep 2009 13:08:58 GMT

Start with the S-10 block. They're stronger. You will have to address detonation as well. the Duke is prone to it any way. The turbo will only make it worse.

Re: New Member - Intro and thinking about turbo 2.5...

David Allen — Wed, 23 Sep 2009 02:10:14 GMT

Ok thanks for the info. I had forgot I'd joined and posted that message! It's sad that these are so weak compared to the V6 engines. You can boost them hard

Re: New Member - Intro and thinking about turbo 2.5...

SEAN — Wed, 23 Sep 2009 02:10:02 GMT

Check out this link: http://ironduke7.tripod.com/IronDuke.htm It tells the difference in the duke motors that were were built, like the marine block or postal

Re: New Member - Intro and thinking about turbo 2.5...

sram024 — Tue, 22 Sep 2009 18:04:06 GMT

... The stock crank will fly apart at 150hp, its trash. A marine 3.0 crank(with some machining, although I dont think it will work in a FWD) will hold up to

New Member - Intro and thinking about turbo 2.5...

davida1_hiwaay_net — Tue, 22 Sep 2009 17:48:15 GMT

Hey all, this is my first post here. Thanks for letting me join, I'm enjoying reading the old posts now. I'm no stranger to auto forums, and frequent

Re: Chrome And replacement parts

John Crane — Tue, 28 Jul 2009 05:45:23 GMT

Chrome off the shelf is in short supply. However virtually anything can be chromed by the chrome shops. ... From: chevypower454@...

Re: 1987 2m4 wiring issues

John Crane — Tue, 28 Jul 2009 05:45:15 GMT

First things first... do you have power to the fuse block on all connects? ... From: Charlie G. Subject: [AKX's Iron Duke Tech 4 Garage]

Re: what goes here?

John Crane — Wed, 22 Jul 2009 17:17:13 GMT

Odd... I responded to this question already, but it didn't seem to take. Yes, the distributor goes there. ... From: Paul Fox Subject: Re:

a little help plz?

bj_fabian11 — Wed, 22 Jul 2009 17:17:05 GMT

can someone post pics of a 151 iron duke setup in a 1981 or earlier cj? cj5s and cj7s have the same setup i think. that would help me a ton sence i just

1987 2m4 wiring issues

Charlie G. — Wed, 22 Jul 2009 17:16:30 GMT

Anyone good with wiring on the iron dukes? I have my horn out, my tach and oil pressure guage out and my instrument lights out. Connected the horn to the

Re: what goes here?

Eugene — Wed, 22 Jul 2009 17:16:25 GMT

If you were to posted pics of the whole engine marking what u want to know about it would be much easier to tell you.

Re: what goes here?

gear_blaster_master — Wed, 22 Jul 2009 17:16:23 GMT

... Distributor and hold down clamp bolt...

Chrome And replacement parts

chevypower454@... — Wed, 22 Jul 2009 17:16:20 GMT

Hey guys, im Josh and i just joined the group. I am about to buy an 89 S10 that has been modded into a convertible, the guy did a beautiful job on the outside

Super Duty 16V DOHC Cosworth head on ebay

J. — Wed, 22 Jul 2009 17:16:20 GMT

I talked myself into parting with this. If anyone here is interested its ebay item 260430207413

Re: 1984 Fiero

Eugene — Wed, 22 Jul 2009 17:16:16 GMT

I have asked myself that several times so I pulled the head to see if there was any exesive carbon build up etc, and it all looks good.I used a rare earth