banhamspyders at Yahoo! Groups

Re:

j w — Thu, 02 Jul 2009 18:51:48 GMT

Hi, If you look in my photos JB you will see how I add an in line sensor and connected to a Smith water Gauge and remove the normal Skode one very simple to

Re:

Colin Pickett — Thu, 02 Jul 2009 15:48:51 GMT

Hello, i also have a water temp gauge if you want it? ... From: Nikhil Dholakia Subject: Re: [banhamspyders] To:

Re:

Nikhil Dholakia — Tue, 30 Jun 2009 22:11:12 GMT

While we are talking about guages, does anyone got a spare water guage? I just need to compare the readings i am getting on mine. I think the needle is not

Re:

Colin Pickett — Tue, 30 Jun 2009 20:03:03 GMT

hello, i have an old fuel guage with a low level light built in, i do not know if it works as i had it with all the other spares that came with the car. cheers

(no subject)

Peter Joyner — Mon, 29 Jun 2009 17:02:57 GMT

Hi All I need to pick your brains again. I want to fit electronic ignition to my 130 engine. It currently runs the older (black body short cap) distributor. I

(no subject)

Peter Joyner — Mon, 29 Jun 2009 14:01:07 GMT

Hi All Does anyone have an old type seperate fuel gauge they don't need please? Mine seems to have died. Thanks Peter

Re: suspension

mick-watson@... — Thu, 25 Jun 2009 18:07:19 GMT

Hi Nik I have fitted at rear Ford Escort Mk1/11 standard springs RD 1016 10.5" long and at front Ford Fiesta XR2 RD 1033 9"-1". These are available from Rally

Re: suspension

Peter Joyner — Thu, 25 Jun 2009 11:43:20 GMT

I followed Banham's advice (always a little risky I know) and just chopped 2 turns off the coil springs. I fitted 15inch VW wheels with 165/80 tyres. Ride

Re: suspension

Nikhil Dholakia — Thu, 25 Jun 2009 09:03:38 GMT

I spoke to Graham at Jorily and he said that he has sold many of these kits to spyder buliders. Has anyone purchased these. It will be a full set of new shocks

suspension

Nikhil Dholakia — Thu, 25 Jun 2009 07:36:39 GMT

I need to sort out my front suspension. the ride height needs to be lowered and the ride quality needs a little improvements so it absorbs the bumps a little

speedo clocking

Nikhil Dholakia — Thu, 25 Jun 2009 07:33:42 GMT

Does anyone know if the old analogue skoda odometer can be clocked? I have a replacement one that needs the mileage adjusting and I was wondering if its safe

Re: Fuel economy, hmmmmm not a very exciting topic ;o)

Nikhil Dholakia — Mon, 22 Jun 2009 08:19:29 GMT

I think I need some help tuning my carb - i only got about 40mpg :-( 4 spyders were out at newark on the saturday :-) 2009/6/22 Matt Peacock

Re: Fuel economy, hmmmmm not a very exciting topic ;o)

Matt Peacock — Mon, 22 Jun 2009 05:46:13 GMT

howdy all well ....... I managed to get a very comfotable 54.3mpg back from newark. I was driving between 68 and 80 (apart from a small 50 zone with average

skoda / k series

iggypop37 — Mon, 15 Jun 2009 20:57:08 GMT

hello jay i was very interested in your use of the k series in the 1000MB. of course if it can be done in a 1000MB skoda - shouldn't be beyond the bounds of

Re: Alfa/Skoda Engine swap.

jay ivey — Wed, 10 Jun 2009 18:07:12 GMT

Hello there, Did you have the 4 holes drilled for a 136 or 120 skoda. Both different Im afraid.. Take care Jay Ivey.. ... From: porschemorg