dxatlas_group at Yahoo! Groups

Re: Skimmer Server, prevent spotting calling calls on CQ frequency

pe2hd — Wed, 10 Feb 2010 11:43:48 GMT

Hi again, After giving it another thought there could be a problem. because during a normal QSO usualy the transmissions starts and ends with something like

Re: Skimmer Server,

Bruce Tanner — Wed, 10 Feb 2010 00:26:05 GMT

The 'Skimmer' and 'Skimmer Server' are two different programs with different functions. Check Alex's site for details. Bruce, K2BET

Re: Skimmer Server,

K4IA@... — Tue, 09 Feb 2010 23:55:54 GMT

I am seeing reference to "Skimmer Server" and the version numbers look different from the "Skimmer" I am using. Are there two programs out there? Where do I

Re: Skimmer Server, prevent spotting calling calls on CQ frequency

pe2hd — Tue, 09 Feb 2010 22:16:18 GMT

Thanks again Pete. I am testing (now) under normal conditions. Not in contest conditions. So stations are calling like "CQ CQ DE PE2HD PE2HD AR K" I only want

Re: Skimmer Server, prevent spotting calling calls on CQ frequency

Pete Smith — Tue, 09 Feb 2010 21:58:56 GMT

Hmmm, this is interesting. The scenario Alex identified and I tested involved a sequence like N4ZR TEST PE2HD PE2HD. If the short space is too

Re: Skimmer Server, prevent spotting calling calls on CQ frequency

pe2hd — Tue, 09 Feb 2010 21:49:55 GMT

Thank you very much for your answer Pete. I do have the latest Skimmer Server installed. Skimmer Server starts well but after a cq-calling station makes a qso

Re: Skimmer Server, prevent spotting calling calls on CQ frequency

Pete Smith — Tue, 09 Feb 2010 21:39:56 GMT

You can download the very latest Skimmer Server (1.1), just announced. It should eliminate about 80 percent of the mis-identifications found with Version 1.0.

Skimmer Server, prevent spotting calling calls on CQ frequency

pe2hd — Tue, 09 Feb 2010 12:32:32 GMT

Hi, How can I prevent Skimmer Server spotting callsigns from stations that the CQ calling station is working on his CQ frequency? 73 de PE2HD, Harry

CW Skimmer bandwidth limitation

Laurent F1JKJ (listes) — Sun, 07 Feb 2010 14:25:10 GMT

Hi friends, I am playing with the Skimmer since a good time now, and was wondering about the bandwidth limitation. My setup is "192kHz-capable"

Skimmer Server 1.1

alshovk — Sat, 06 Feb 2010 18:31:09 GMT

Skimmer Server 1.1 has been released. New in this version: - improved CQ/DE detection; - improved dupe rejection; - frequency calibration; - improved spot

Re: Skimmer with a Perseus.wav file?

Alex, VE3NEA — Fri, 05 Feb 2010 15:53:56 GMT

Hi Don, Perseus must be stopped before CW Skimmer can play back a recording. In fact, the radio is not required at all in the playback mode. Please see the

Skimmer with a Perseus.wav file?

Don Moman VE6JY — Fri, 05 Feb 2010 05:36:51 GMT

I haven't seen this particular way of using Perseus with the skimmer software mentioned anywhere else so I need to ask: I wish to use the wideband decode

MEdit qrz.com query

Vytenis — Tue, 02 Feb 2010 10:59:39 GMT

I see QRZ.COM lookup does not work in MEdit. Query most probably has to be changed http://www.qrz.com/detail/CALLSIGN -> http://www.qrz.com/db/CALLSIGN Vytenis

Bandmaster - display country?

vtnn43e48073 — Sat, 30 Jan 2010 21:51:38 GMT

When I hover my mouse over a callsign it no longer shows the name of the country in Band Map. How do I restore that function? Thanks Zack N8FNR

Windows 7

campkohnke — Sat, 30 Jan 2010 18:15:47 GMT

I can't seem to get Onmi-Rig to install properly or work in Windows 7. Is there an upgrade? Jim