impala2000 at Yahoo! Groups

Re: Rust alert

bdo_chevy@... — Tue, 01 Dec 2009 13:57:42 GMT

... From: "StuartF" ... With 206,000 miles and counting and a few dings and small dents, I think the solution will come in the form of a

Re: Rust alert

StuartF — Tue, 01 Dec 2009 12:58:39 GMT

Yes, Brad, that's what was done to my car. I'm sorry you have the same problem. I hope you are able to deal with the problem at relatively low cost. Best

Re: Rust alert

bdo_chevy@... — Tue, 01 Dec 2009 12:47:13 GMT

... From: "StuartF" ... Sounds like the same thing that's happening to my '01. It looks like removal of the plastic rocker molding is

Rust alert

StuartF — Tue, 01 Dec 2009 10:42:14 GMT

A small area of rust developed near the lower back edge of the left front wheelwell of my 2001 Impala LS. The paint and body shop owner who fixed my car told

Re: 2009 remote start problem

bob p — Tue, 17 Nov 2009 22:49:36 GMT

thanks, but as you know most dealers will stall. and this one is doing just that. they have no clue. they keep telling my buddy that the range is normal. he

Re: 2009 remote start problem

Lance — Tue, 17 Nov 2009 03:04:26 GMT

It's still under warranty. I would go back to the dealer and bitch at them that it is not acceptable and have them fix it. There is probable something wrong

2009 remote start problem

bob p — Tue, 17 Nov 2009 01:11:58 GMT

say a friend of mine has a 2009 impala with factory remote start. his problem is the remote has no range. can anyone here tell me if there is a way to increase

Re: Major work on my '01

Bill Burdette — Mon, 16 Nov 2009 21:04:09 GMT

You should feel fortunate that your Impala lasted 200K miles. My 2001 Impala LS literally fell apart at 80K miles, so I wnet back to the good lo'Crown Vic (I

Major work on my '01

bdo_chevy@... — Mon, 16 Nov 2009 20:56:36 GMT

I guess I knew it was bound to happen...with over 200,000 miles my '01 Impala needed some major work. The transmission was rebuilt a few weeks ago and today

Re: noise in the steering wheel

dwight2_s — Sun, 15 Nov 2009 00:38:54 GMT

update, a picture is worth a thousand words, go here: http://www.colinkraft.com/shaft.php My soninlaw just did his 05 impala, said it took roughtly a lil over

Rocker molding removal

bdo_chevy@... — Wed, 07 Oct 2009 12:31:54 GMT

Has anyone ever removed the plastic rocker panel moldings on a 2000-05 model? My '01 needs some paint work in the lower wheel well areas and it looks like the

Re: need help ....couple of problems 2002impala

BLAKE CUMMINGS — Tue, 15 Sep 2009 00:18:11 GMT

you need to the window switch. mainly the only way to fix it. seen them on line for about $60 shipped. as for the other issue it's in the turn signal switch

Re: need help ....couple of problems 2002impala

bdo_chevy@... — Mon, 14 Sep 2009 16:40:58 GMT

... From: "ncblkking252" ... My '01 had the switch go bad; the window would only go up or down when the switch was pushed just right.

Re: Brakes - Pads and Rotors...

sjs01 — Mon, 14 Sep 2009 14:36:03 GMT

Chances are you will not be able to turn rotors because the rotors will be too thin after turning to clean them up plus the cost of machining is close to cost

Re: Brakes - Pads and Rotors...

Thor — Mon, 14 Sep 2009 13:54:00 GMT

Wow... I guess I didn't realize that it would be that much... yeah, I'm probably better off buying the parts and taking it to my buddies garage... thanks for