jmriusers at Yahoo! Groups

Re: turnouts question

layd999 — Mon, 23 Nov 2009 22:19:16 GMT

Jake; That is exactly what I did - there is nothing preventing you having two icons that point to the same device. It's been years since I did it so the

Re: Lok Sound startup hesitation

g_schreyer — Mon, 23 Nov 2009 22:09:27 GMT

there can be an extra delay if the loco loses power while the throttle is set to zero. This allows time for the start up sequence. To test, set the loco on

Re: Can not change Icon in Add Icon dialog box, Icon was too large w

Dick Bronson — Mon, 23 Nov 2009 22:08:22 GMT

Larry, Have you tried this with a more recent version? I just tried it with 2.7.8 and the big (full screen) background images were scaled down to fit, and

Re: Decoder Pro timed out error message

Peter — Mon, 23 Nov 2009 22:06:05 GMT

Bill, These are "Virtual" COM ports, not physical. With the PR3 you need to plug into the same USB port as you were using when you set it up. To see what Com

Re: Windows 7-Not a specific DecoderPro question

Williiam S Adkins — Mon, 23 Nov 2009 21:24:07 GMT

Hans: Are you using 64-bit? If so, did you have to install new drivers to get your LI-USB to function correctly? TIA Bill [Non-text portions of this message

Re: turnouts question

gregd99 — Mon, 23 Nov 2009 21:07:02 GMT

Jake, just to clarify.... if you use "Panel editor" you can have multiple instances of the same turnout. My answer was for Layout Editor where (I understand)

Re: LocoBuffer USB drivers (Was - Re: Need help with Windows XP inst

Dick Bronson — Mon, 23 Nov 2009 20:21:54 GMT

Barr, Check the info at http://www.rr-cirkits.com/faq/faq.php?answer=13&cat_name=001%20-%20LocoBuffer-USB&category_id=4#13 because XP gets really confused if

Re: Decoder Pro timed out error message

Bill Nielsen — Mon, 23 Nov 2009 20:15:31 GMT

I'm trying to clear some space to set up the netbook and PR3 here at the house to play with it some more, but it's not easy to find a place to do this, since

Re: Decoder Pro timed out error message

Bill Nielsen — Mon, 23 Nov 2009 19:57:35 GMT

Hi Jim, I'm not sure how to check the com port other than believe the JMRI software when it says on the startup screen that there is a PR3 connected to com

Re: Decoder Pro timed out error message

Bill Nielsen — Mon, 23 Nov 2009 19:54:44 GMT

Hi Jim, Sorry, I guess I should have mentioned that the Netbook/PR3 was being used as a stand alone programmer set up on a banquet table, neither physically or

Re: turnouts question

Nick Kulp — Mon, 23 Nov 2009 19:53:44 GMT

Hi Jake, ... After namy years, I went "outside the atlas box" and added a siding to my layout. I use digitrax to help with the layout. Before I added

Re: Decoder Pro timed out error message

Bill Nielsen — Mon, 23 Nov 2009 19:53:05 GMT

Hi Bob, Yes, the com port was an issue at first, but I think I got that figured out, after some confusion, since though it's a USB port the software refers to

Re: layout editor multiple panels

tractionring — Mon, 23 Nov 2009 19:01:20 GMT

Hi peter, Delete and store process worked OK. Regards Alan

Re: Windows 7

mckinney@... — Mon, 23 Nov 2009 18:37:30 GMT

Hans, It seems to work for me even 64bit Windows 7. Regards, Howard McKinney ... From: hansolep Subject: [jmriusers] Windows

Re: turnouts question

jhemp04 — Mon, 23 Nov 2009 18:34:16 GMT

Yes, physically I do no mind if they operate together(actually that is how I set it up). It is drawing the panel to show two seperate switches that have the