korgms2000 at Yahoo! Groups

Re: Korg Ms2000r with ableton

jeff bornhoeft — Fri, 13 Nov 2009 15:12:56 GMT

Ableton won't "see your synth", just the midi out. Send notes to the M-audio 24/96 -midi out on the right midi channel (1 by default) and you'll be in

Korg Ms2000r with ableton

robertzuggo — Fri, 13 Nov 2009 14:49:25 GMT

Hi All! Please help me! I Bought My Korg ms2000r last week, but i can't play that. I Have a M-audio 24/96 Pci soundcard , M-audio oxygen49 Pc with ableton. Set

Re: Conversion of MS2k to M3 EXB Radias board

Ian Sunderland — Tue, 10 Nov 2009 19:20:33 GMT

Hi Daz, Everyone, Having started programming I can see how it would be difficult to write a conversion program for MS2k to the EXB-Radias board. Any dual or

Re: Korg Owner's Manual Link

darrenrichardsuk — Tue, 10 Nov 2009 01:29:48 GMT

... You can download the manual for our beloved synth from here : http://korg.com/ReadMoreSupport.aspx?dld=2868

Korg Owner's Manual Link

Jayne — Tue, 10 Nov 2009 01:24:39 GMT

I just tried the link that was in documents for the Korg link to an owners manual for our beloved MS2000, and the link was dead.

Re: Conversion of MS2k to M3 EXB Radias board

Jon Carroll — Fri, 06 Nov 2009 00:34:55 GMT

ooo, that's an idea! ... From: "Ian Sunderland" To: Sent: Thursday, November 05, 2009 9:22 AM

Re: Conversion of MS2k to M3 EXB Radias board

Ian Sunderland — Thu, 05 Nov 2009 17:23:10 GMT

Ok here's my current question. Can I set up my MS2K so that the front panel controls alter the parameters of the Radias board on the M3? I basically want to

Re: Conversion of MS2k to M3 EXB Radias board

Ian Sunderland — Sun, 01 Nov 2009 21:48:36 GMT

Hi everyone, Just following on from the thread below I am planning to recreate some of the patches from my MS2k into my M3 for the Radias board. IMHO some of

Re: Korg MS2000R Firmware update failure

Jim Atwood — Wed, 28 Oct 2009 00:09:46 GMT

... Great you got it transferred ok. Any new or important features with this update? Thanks!

Re: Korg MS2000R Firmware update failure

nbogiatzoglou — Sun, 25 Oct 2009 18:31:02 GMT

Ok, problem solved. The M-audio was the guilty one, when I tried a different MIDI interface everything went very smoothly.

Korg MS2000R Firmware update failure

nbogiatzoglou — Sun, 25 Oct 2009 16:23:13 GMT

Hi, I just got an MS2000R which had version 1.05 of the firmware installed. Seeing that a new version was available in the Korg website, I downloaded it and

Re: Ms2000 and the uno 1 - 1.

Dale — Mon, 12 Oct 2009 18:44:12 GMT

wow that goes against all normal things Thanks Eric !!!! dale ... From: "Eric Dunn" ... connected to the MIDI OUT port of wherever

Re: Ms2000 and the uno 1 - 1.

Eric Dunn — Mon, 12 Oct 2009 02:19:21 GMT

The uno is a little queer in that the OUT port from the uno has to be connected to the MIDI OUT port of wherever your midi data is originating from. The

Re: Ms2000 and the uno 1 - 1.

balderson04 — Sun, 11 Oct 2009 13:28:39 GMT

If the Uno is working correctly with other programs (and you mentioned Ableton) and not with PatchBuddy, then perhaps there is a problem with PatchBuddy and

Re: Ms2000 and the uno 1 - 1.

Tyler Tyssedal — Sat, 10 Oct 2009 20:20:42 GMT

So here is my current set up.. Both of the Uno's midi in cables are going into the ms2000, the out and the in. Both of the Uno's midi cables are marked as "to