http://groups.yahoo.com/group/orion565/ Ten-Tec Orion 565/566 Fri, 17 May 2013 15:17:27 GMT saukp http://groups.yahoo.com/group/orion565/message/9474 http://groups.yahoo.com/group/orion565/message/9474 hi chris My mod is NOT a 9mhz mode .. but is the antenna mod to spare rca.. FYI My mod shares the orion's subreceiver antenna and brings it out to the spare Fri, 17 May 2013 13:05:07 GMT John Huffman http://groups.yahoo.com/group/orion565/message/9473 http://groups.yahoo.com/group/orion565/message/9473 It appears that I have fixed the no audio or transmit problem. At least for the last 12 hours or so. I will tell the tale in hopes it will help someone else. Fri, 17 May 2013 13:00:00 GMT John Huffman http://groups.yahoo.com/group/orion565/message/9472 http://groups.yahoo.com/group/orion565/message/9472 For Sale - Model 219 - 250hz CW filter for Omni-V, Omni-VI, Orion 1, etc. Specifications - Center Frequency 9.000750 6 dB BW, Hz 250 Shape Factor, 6/60 dB Thu, 16 May 2013 14:31:29 GMT Chris Pinholster http://groups.yahoo.com/group/orion565/message/9471 http://groups.yahoo.com/group/orion565/message/9471 Hi Paul, When you use config #3, and using VMXP for cw skimmer, are you using MLDX to log and control the O1? The SDR-IQ with separate antenna, is connected to Thu, 16 May 2013 12:40:08 GMT John Huffman http://groups.yahoo.com/group/orion565/message/9470 http://groups.yahoo.com/group/orion565/message/9470 Barry - No scope. I've fixed easy things (had no PTT on fromnt panel mic connection) but looking through schematics for these issues is more than I can bite Wed, 15 May 2013 23:42:39 GMT N1EU http://groups.yahoo.com/group/orion565/message/9469 http://groups.yahoo.com/group/orion565/message/9469 John, with that 1 watt xmit output, can you hear the Orion tx signal on the correct freq on your K3 and does it sound clean? No rx output from either main or Wed, 15 May 2013 20:40:39 GMT John Huffman http://groups.yahoo.com/group/orion565/message/9468 http://groups.yahoo.com/group/orion565/message/9468 Onno - The firmware is version 3.032 that has been running fine for a few months. No problem with the firmware. Did several master resets and battery failure Wed, 15 May 2013 19:58:59 GMT pa1ap http://groups.yahoo.com/group/orion565/message/9467 http://groups.yahoo.com/group/orion565/message/9467 I assume power off/ on does not fix the issue? Perhaps the cpu battery is end of life. The usual master reset and normal reset would be a first step. Also Wed, 15 May 2013 19:36:41 GMT John Huffman http://groups.yahoo.com/group/orion565/message/9466 http://groups.yahoo.com/group/orion565/message/9466 The last two days I have had an intermittent problem with my Orion 565. I have no receive audio or just white noise. When this happens no transmit output over Wed, 15 May 2013 19:19:18 GMT k1fpv http://groups.yahoo.com/group/orion565/message/9465 http://groups.yahoo.com/group/orion565/message/9465 Well, maybe that is something that Ten-Tec will be able to rectify by something as simple as a firmware update. I've got a couple of radios that are already Wed, 15 May 2013 19:19:04 GMT k1fpv http://groups.yahoo.com/group/orion565/message/9464 http://groups.yahoo.com/group/orion565/message/9464 Well, maybe that is something that Ten-Tec will be able to rectify by something as simple as a firmware update. I've got a couple of radios that are already Wed, 15 May 2013 12:53:33 GMT saukp http://groups.yahoo.com/group/orion565/message/9463 http://groups.yahoo.com/group/orion565/message/9463 hello pierre my basic setup is an Imac computer running osx and a Vmware with XP with this setup i can run various configurations Both config #1 and #2 are OSX Wed, 15 May 2013 03:26:37 GMT Sam W Jacobs CET http://groups.yahoo.com/group/orion565/message/9462 http://groups.yahoo.com/group/orion565/message/9462 I could never understand T*T's thinking on this.  Why put "safety stops" at the beginning and ending of each band ?  Almost as if they are policing the Tue, 14 May 2013 19:38:17 GMT pierre_rothenburger http://groups.yahoo.com/group/orion565/message/9461 http://groups.yahoo.com/group/orion565/message/9461 Hi Paul, Seen your pics of your mod file! Great! Question: do you run all this concurrently on a same PC , that is: O1 w.N4PY, SDR-IQ w. PowerSDR-iq ( I use a Tue, 14 May 2013 17:34:14 GMT pierre_rothenburger http://groups.yahoo.com/group/orion565/message/9460 http://groups.yahoo.com/group/orion565/message/9460 YES Rick, I was referring to your mod I recognized. Sri for being late to confirm.. Meanwhile I got my N4PY SW currently working though it, getting started.