suzukiintruder1400 at Yahoo! Groups

ignition coils for 92 intruder 1400

blackfire41 — Sun, 22 Nov 2009 19:02:05 GMT

Anyone know of a good , lower cost replacement for the originals? would rather not spend 70-100 a piece for them, I have sparking plug wires so have to replace

Re: Stalling problem with an 05 S83

Alan Wyndham — Sun, 15 Nov 2009 22:54:23 GMT

Check your fuel pump is working OK ... From: fetskojoe Subject: [suzuki intruder 1400] Re: Stalling problem with an 05 S83 To:

Re: Stalling problem with an 05 S83

fetskojoe — Sun, 15 Nov 2009 13:42:50 GMT

My 1998 Intruder 1400 had a serious stalling problem. Two years ago, I had the carbs cleaned, synchronized and adjusted by a former Suzuki mechanic. That

Re: HELP!!!

William Hancock — Wed, 16 Sep 2009 02:07:26 GMT

Standard compression 142-199 psi Minimum 114 psi ... From: trendkil187 Subject: [suzuki intruder 1400] HELP!!! To:

HELP!!!

trendkil187 — Tue, 15 Sep 2009 22:50:53 GMT

i have a 93 vs 1400 does anybody know what the compression is supposed be?

What years did 1400 come in maroon?

Anigo Montoio — Tue, 28 Jul 2009 21:12:08 GMT

What years did 1400 come in maroon? Most of the ones that I have seen are black. Mine is supposed to be an 87 but I haven't seen and 87 trhat is maroon yet.

Re: Need a 1400 intruder clutch line

C Martin — Thu, 23 Jul 2009 03:35:36 GMT

Do you know if the 800 will work on a 1400? --- On Wed, 7/22/09, BILL LANTER wrote: From: BILL LANTER Subject:

1400 Intruder Clutch Line Possibles

Danny W. Burdick — Thu, 23 Jul 2009 03:16:28 GMT

Ebay Item number: 230356608024 Ebay Item number: 370232957030 Ebay Item number: 190323281479 Ebay Item number: 290288002522 Ebay Item number: 370227160383 Ebay

Re: Need a 1400 intruder clutch line

BILL LANTER — Thu, 23 Jul 2009 02:56:55 GMT

MIGHT BE ABLE TO SUBSTATUTE ONE FROM ANOTHER MODLE ALSO. ... From: C Martin Subject: Re: [suzuki intruder 1400] Need a 1400

Re: Need a 1400 intruder clutch line

C Martin — Thu, 23 Jul 2009 02:37:50 GMT

Mine is a 1987. Thanks for the suggestion. Chet ... From: BILL LANTER Subject: Re: [suzuki intruder 1400] Need a 1400 intruder

Re: Need a 1400 intruder clutch line

BILL LANTER — Thu, 23 Jul 2009 00:50:20 GMT

you mite try jp cycle .what year ? ... From: Anigo Montoio Subject: Re: [suzuki intruder 1400] Need a 1400 intruder clutch line To:

Re: Need a 1400 intruder clutch line

Anigo Montoio — Wed, 22 Jul 2009 22:46:36 GMT

Re: Need a 1400 intruder clutch line

Vinnie — Thu, 16 Jul 2009 21:07:09 GMT

Try this place. http://partsfinder.onlinemicrofiche.com/Alba/Suzuki_OEM/SuzukiMC.asp?Type=12&A=233 Vinnie ... From: Anigo Montoio To:

Need a 1400 intruder clutch line

Anigo Montoio — Thu, 16 Jul 2009 20:52:22 GMT

Hello group, I need a 1400 intruder clutch line where do I get one? I went to suzuki dealer and they were 300 dollars and a discontinued part. I am hoping to

Re: 1998 VS1400 advice

fetskojoe — Thu, 16 Jul 2009 14:36:08 GMT

I purchased my 1998 VS1400 two years ago with 3700 miles on it. It had a stalling problem when I bought it resulting from the former owner trying to adjust