vg-8 at Yahoo! Groups

Re: Hooking a guitar amp into the VG 99 chain

Brooks Bell — Tue, 24 Nov 2009 00:17:45 GMT

... No, it hadn¹t occurred to me that I could do that. I was thinking of doing one at a time. The idea of doing both at once is better! Thanks. ... Yes-

Re: Hooking a guitar amp into the VG 99 chain

Mech — Mon, 23 Nov 2009 23:39:46 GMT

... Feedback loop. Be very, very careful there. If I read you correctly, your signal path is going: guitar >> vg-99 >> amp >> vg-99 >> out Using the default

Hooking a guitar amp into the VG 99 chain

Brooks Bell — Mon, 23 Nov 2009 16:22:05 GMT

I've got a nice little studio guitar amp that I'd like to use with my VG99 in recording. The amp is low wattage and has a line out and regular guitar in but

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

Djordje — Mon, 23 Nov 2009 11:12:07 GMT

Gus wrote: "...how to position the Normal PU in the chain..." ... The normal pu will always move within the COSM pu in the VG-99. The only way to separate

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

Dustin O'Neal — Mon, 23 Nov 2009 00:06:47 GMT

Gus, To answer your original question, the "Guitar Out" jack on the 99 is a pass through, and is not (and cannot be) affected in any way by the 99. So to

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

NoisE1010 — Sat, 21 Nov 2009 16:10:44 GMT

I appreciate all the recommedations and I will experiment with that. The problem I have is that I may be trying to have too many guitar sounds at once. It

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

Brooks Bell — Fri, 20 Nov 2009 23:46:27 GMT

You can do this easily. I use lots of patches that mix the mag pickups with the COSM ones. In the VG 99 software the details section of the COSM guitar

switch midi guitar for sale-innovo 3 (h-s-s with internal gk2a)

alex — Fri, 20 Nov 2009 20:47:29 GMT

350.00 in denver but can ship...303-725-3100(leave message or hsuru4u@... thank you

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

Jerry Kelley — Thu, 19 Nov 2009 17:21:09 GMT

Unless you are using a dual channel COSM patch, the easiest way is to "You could set up a dual channel patch ... of ... This way each would have its own FX

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

NoisE1010 — Thu, 19 Nov 2009 01:59:10 GMT

Yes, Jerry, I mean foot control of the vanilla (non-VG) guitar signal. On my Taylor, this would mean controlling the volume of the acoustic RMC piezo sound

Re: Normal PU Volume versus Guitar Output - Controlling with FC300?

Jerry Kelley — Thu, 19 Nov 2009 01:01:47 GMT

If the Godin has the built in 13 pin pick-up, it already has separate volume controllers. I am not sure I understand your question completely (do you mean

Normal PU Volume versus Guitar Output - Controlling with FC300?

NoisE1010 — Wed, 18 Nov 2009 20:22:51 GMT

I always hate prefacing my questions with the statement: "This may be a stupid question,.." but it seems to fit. I want to be able to control the volume of my

Re: Roland VG-99 and VB-99 will work just fine with Roland UA-4FX US

Steve Conrad — Sun, 08 Nov 2009 20:27:51 GMT

Snow Leopard Diver is new. Sent from my iPhone On Nov 7, 2009, at 1:51 PM, "Ruud Mulder (Home)" wrote: I agree. VG99 works well

Re: Roland VG-99 and VB-99 will work just fine with Roland UA-4FX US

Ruud Mulder (Home) — Sat, 07 Nov 2009 21:52:11 GMT

I agree. VG99 works well directly via usb with Mac.

Re: Roland VG-99 and VB-99 will work just fine with Roland UA-4FX US

Brooks Bell — Sat, 07 Nov 2009 20:29:47 GMT

What¹s the advantage to using these drivers? I¹m on a Mac is it just that the VG99 original drivers aren¹t compatible with Win 7 or are there other